|Place of Origin:||China|
|Model Number:||SF Series|
|Minimum Order Quantity:||1|
|Payment Terms:||T/T, L/C|
|Production Name:||SF Series Flotation Machine In Ore Dressing||Attributes:||Mining Machine|
|Application:||Ore Processing||Range Of Use:||Flotation|
|Advantage:||Low Cost||Feature:||Grinding Operations In Ferrous|
series sf flotation machine,
high content flotation machine,
ore dressing flotation equipment
Flotation machine is applicable to grading of non-ferrous and ferrous metal, also applicable to grading of nonmetals, such as coal, fluorite and talc. The impeller of flotation machine is driven by motor v-belt, centrifugal effect is thus produced and negative pressure is formed, which, on the one hand, absorbs adequate air to mix with ore pulp, and on the other hand, stirs the ore pulp and mixes the ore pulp with medicines and refine bubbles; thus, the minerals will be adhered to the bubbles and float to the pulp surface and form foam layer. Adjust the opening of flash board and cone valve and control the liquid level to make the useful bubbles scraped out by scraper blade. For selection of flotation machines, the following information shall be indicated: Models, specifications and number of flotation cells. Number of scraper blade devices (left or right). Single-side scraping or double-side scraping. Numbers of feed boxes, middling boxes, tailing boxes, feed pipes and middling pipes. Liquid level can be controlled manually, electrically or automatically. Deployment diagram of flotation technological process should be provided.
The flotation machine is driven by the V-belt drive of the motor to rotate the impeller, which produces centrifugal action to form a negative pressure. On the one hand, it inhales sufficient air to mix with the ore pulp, on the other hand, it stirs the ore pulp to mix with drugs, and at the same time refines the foam, so that the minerals adhere to the foam. Float to the pulp surface and form mineralized foam. Adjust the height of the ram to control the liquid level so that the useful foam is scraped off by the scraper.
SF flotation machine is a mechanical stirring flotation machine with dual functions of self-suction air and self-suction slurry. It adopts a new structure of forward-tilting tank body double-blade water wheel equipped with draft pipe and false bottom device, and the pulp in the tank carries out double circulation up and down according to a fixed flow mode, which is beneficial to the suspension of coarse-grained minerals. SF flotation machine is mainly composed of trough body, impeller, spindle parts, motor scraper and its transmission device, etc., which are composed of draft pipe and false bottom with volume greater than 10m3.
This series of flotation machines is suitable for the separation of non-ferrous metals and nonmetals such as coal fluorite and talc.
1. Large inspiratory volume and low power consumption;
2. Each tank has triple functions of air suction and flotation. It is a self-contained flotation circuit without any auxiliary equipment, which is convenient for changing the process flow;
3. Reasonable pulp circulation can minimize coarse sand precipitation
4. The automatic control device with pulp surface is convenient to adjust;
5. Impeller with backward tilting upper and lower blades The upper blade produces pulp for upper circulation and the lower blade produces pulp for lower circulation.
SF flotation machine and JJF flotation machine can be configured as a combined unit. SF type as suction tank and JJF type as DC tank, and the whole unit is installed horizontally.
Suitable for classification, dehydration and concentration operation of different material particle sizes.
|Name||SF Series Flotation Machine In Ore Dressing|
|Model and specification||Effective volume||Dimensions of tank||Processing capacity||Installation power||Impeller speed||Scraper speed||Volume of Air intake||Single Tank Weight|
|m3||m×m×m||m3/min||Stirring use||Scraper use||r/min||r/min||m3/m2.min||kg|
Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, as well as the design and manufacture of complete sets of sand and gravel materials, and the design and manufacture of dry tailings discharge. The company was founded in 1971 and turned into a joint-stock enterprise in 1997.
Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 material testing machines, aging vibration devices, etc.
The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.
Among them, 17 products have obtained national patents. Among them, the crusher and ball mill have won many national honors.
Contact Person: Sales Manager