|Place of Origin:||China|
|Model Number:||Filter Press|
|Minimum Order Quantity:||1|
|Packaging Details:||Standard shipping packaging|
|Delivery Time:||one month|
|Type:||Filter Press||Name:||Programmed 1500 Filter Press Equipment , Frame And Plate Filter Press|
|Purpose:||Gold Mine||Attributes:||Mining Machine|
|Keyword:||Frame And Plate Filter Press||Motor Power:||5.5kw - 15kw|
|Filter Plate:||Chamber Type||Filter Area(m2):||220|
iso plate and frame filter press,
5.5kw plate and frame filter press,
15 kw filter press equipment
ISO9001 Certificated Filter Press Equipment 5.5kw - 15kw
A filter press consists of a frame, a filter plate, a pressing system (manual, mechanical or hydraulic) and an electrical control cabinet.The frame consists of a base, a pressing plate and a beam, and supports the pressing device and the filter plate.
The filter is mounted on the beam between the end plate and the pressure plate. With filter cloth attached In operation, a pressing device (cylinder piston rod or screw) drives a pressure plate to press the filter plate and the filter cloth between the pressure plate and the end plate. The filter chamber is formed between the press filter plate and the material enters the filter chamber through the feeding port in the end plate. Solid particles are trapped in the filter chamber forming a cake. as the fluid is drained from the foot plate likewise Blow dry the cake. Compressed air can pass through the purge port.
Plate and Frame Filters - The press is similar to the concave plate filter in structure, except that the filter section consists of a plate, a frame and a filter cloth, with a filter chamber between the plate and the frame.The liquid flow of the filter press can be divided into external flow and internal flow. Outflow refers to the filtrate being discharged directly from the outlet port of the filter plate; The internal flow refers to the filtrate from the different filter plates being collected before being discharged from the filtrate port.
The filter mechanism is composed of a filter plate, a filter frame, a filter cloth, and a squeeze diaphragm. Both sides of the filter plate are covered by filter cloth. When a squeeze diaphragm is required, a set of filter plates is composed of a diaphragm plate and a side plate. The two sides of the base plate of the diaphragm plate are covered with rubber diaphragms, the outside of the diaphragm is covered with filter cloth, and the side plates are ordinary filter plates. The material enters each filter chamber from the feed hole on the thrust plate, and the solid particles are trapped in the filter chamber because the particle size is larger than the pore size of the filter medium (filter cloth), and the filtrate flows out from the outlet hole under the filter plate. When the filter cake needs to be squeezed dry, in addition to pressing with a diaphragm, compressed air or steam can also be used to pass through the washing port, and the airflow will wash away the water in the filter cake to reduce the moisture content of the filter cake.
•The filter plate is made of reinforced polypropylene, molded at high temperature, and then processed by professional precision equipment. The formed filter plate has high strength, good airtightness, light weight, corrosion resistance, non-toxic and odorless, and meets the relevant sanitary standards.
•The equipment has a high degree of automation, with hydraulic cylinders compressing, maintaining pressure, compensating pressure, feeding, returning, and filter plate loosening and unloading cakes. The entire process is fully automated without manual phased operation.
• Filtration method: The maximum filtration pressure of the feed filter pressure tested by the professional department should not be greater than 0.6MPa. Using within the specified pressure range, it can not only ensure the best performance of the filter press and the supporting filter media, but also enable the equipment And the filter medium (filter cloth) life cycle is maximized.
•Safety device: The filter press is equipped with a variety of protective devices when automatic operation is realized to prevent the misoperation of the filter press from over-pressure and over-limit.
• The products are divided into two types: ordinary filter press and fully enclosed filter press.
• Normal type means that the filter cloth is covered on the surface of the filter plate, and the sealing surface is sealed by the filter cloth;
•Fully enclosed means that there are grooves on the sealing surface of the filter plate. The filter cloth and rubber sealing strip are embedded in it. This high sealing performance prevents the capillary leakage of the filter cloth during filtration.
Scope of application
Mining, metallurgy, chemical, environmental protection, food, pharmaceutical, textile printing and dyeing, profile manufacturing, wine making and other industries.
|Name||Programmed 1500 Filter Press Equipment , Frame And Plate Filter Press|
|Model||Frame And Plate Filter Press|
|Technical parameters||Work length700mm,Max length 850mm||Tank diameter φ320mmx2,press strength 20MPa-25MPa|
|Filter area(m2)||Number of filter plates||Thickness of filter plates (mm)||Filter chamber volume(m3)||Total weight(kg)||Base size(mm)||Dimension(mm)|
|Nornmal filter flat:Input pressure below 1.0MPa,Tempreture -5° -80c Material of filter flat:Strengthened polypropylene|
|Strengthed flat :Input pressure below 1.2MPa, Tempreture -5.~120. Material of filter flat:Reinforced polypropylene|
Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, as well as the design and manufacture of complete sets of sand and gravel materials, and the design and manufacture of dry tailings discharge. The company was founded in 1971 and turned into a joint-stock enterprise in 1997.
The company occupies more than 50 acres, with total assets of 90 million yuan and more than 200 employees, including 96 engineering and technical personnel.
Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 material testing machines, aging vibration devices, etc.
The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.
Among them, 17 products have obtained national patents. Among them, the crusher and ball mill have won many national honors.
The products are sold all over the country and exported to Russia, Mongolia, South Korea, Chile and other international markets.
We are a member of the China Heavy Machinery Association, a member of the Crushing and Grinding Association, a member of the Mining Machinery Association, and a member of the China Building Materials Machinery Association. We have participated in the formulation of a number of equipment manufacturing standards.
The company's principles are: First-class talents, First-class management, First-class machine, First-class quality, First-class honor.
Sincerely hope to reach friendly cooperation with you.
Contact Person: Sales Manager