Mine Processing 400×600mm Toothed Roll Crusher Mining Machine

Mine Processing 400×600mm Tooth Roll Crusher Mining Machine

Jaw crusher working principle:

The structure of jaw crusher contains the frame, eccentric shaft, big belt pulley, flywheel, movable jaw, side guard plate, toggle plate, rear seat of toggle plate, modulation gap screw, returning spring, fixed jaw plate and movable jaw plate, etc, among which the toggle plate is used for safety. The working mode of this series jaw crusher is pressing deviously.

The working part of the jaw crusher is two jaw plates, one is the fixed jaw plate (fixed jaw plate), which is fixed vertically (or the upper end is slightly outward) on the front wall of the machine body, and the other is the moving jaw plate (moving jaw) . Inclined, forming a crushing cavity (working cavity) with a large upper part and a smaller lower part with the fixed jaw plate. The movable jaw plate and the fixed jaw plate make periodic reciprocating motions, sometimes separating and sometimes approaching. When separating, the material enters the crushing cavity, and the finished product is discharged from the lower part; when approaching, the material installed between the two jaw plates is squeezed, bent and split to be crushed.

Characteristic And Uses
This machine adopts newest standard which optimized designed by the computer. And enjoys the advantages of simple structure, high yield, low energy convenient use, etc And it is the present domestic most advanced type suitable for various mineral and rock for rough and middle crush work with the compressive strength below 250 Mpa.

Note
Productivity affected by the granularity and hardness of the material to be broken. The greater the granularity and hardness are, the lower the output is. Or, on the contrary, The productivity index above is just for reference by users.

Company introduction

Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, complete sand and gravel material design and manufacture, and dry tailings design and manufacture. The company was founded in 1971 and converted into a public limited company in 1997.The company covers an area of ​​more than 50 acres, total assets of 90 million yuan and more than 200 employees, including 96 engineers and technicians.Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 materials testing machines, aging vibration equipment, etc.The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.Among them, 17 products have obtained national patents. Among them, the crusher and ball mill have won many national awards.Sincerely hope to reach a friendly cooperation with you.

FAQ to save your precious time!

Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.

Q2: How long is the warranty period of your equipment? Does your company provide spare parts?
Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.

Q3: How long does it take to deliver?

Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.

Q4: Do you provide machine operation guidance?

Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.